PRODUCT LIST
- HOTLINE
+86 18068282588
+86 13328116360
7 Precautions for Surface Grinders in Use
Release Date：2020-05-26 16:53:27 Number of visits：408
Grinding machines are divided into many types, so what is the main purpose of surface grinding machine? Surface grinder is mainly used to rotate the grinding wheel to grind the workpiece so that it can achieve the required flatness, according to the shape of the table can be divided into rectangular table and round table two kinds of table, rectangular table surface grinder main parameters for the width and length of the table, round table surface grinder main parameters for the diameter of the working table surface.
Surface grinding machine in the specific operation process need to pay attention to those contents? Follow the editor of our Gangyu Grinder to take a look!
1, The positioning rules of surface grinding machine
What position should the machine tool be placed in and how to install it is the best? It is understood that should be in the maximum movement space outside the reserved 300mm or more, each foot screws eat tight, the table in front of the back and left and right level in 0.04/1000mm or less. (Installation of frequency converter requirements need to be higher)
2、Selection of grinding wheel for surface grinder
The selected grinding wheel must be able to withstand the weekly rotation speed of 2000m/min or more, because if the speed is too low, it will be easy to leave traces on, but the speed is too high, the grinding wheel price is much higher, in addition to pay special attention to is strictly prohibited to use the grinding wheel with damage. If there are conditions, it is best to do a flange must be balanced after the new grinding wheel is installed.
3, Surface grinding machine spindle
Before installing the grinding wheel to determine the spindle for clockwise rotation.
4、Hydraulic device of surface grinder
Surface grinder using viscosity of 46 hydraulic oil.
New machine in the use of three months after the need to replace the hydraulic oil, and then replaced once a year, and must clean the oil tank.
5、Lubrication device of surface grinder
Use guideway lubricant with a viscosity of No. 32. (Recommended Mavita No. 1 or No. 1405).
Confirm the oil level of the oil tank (pool) every day to ensure that it is above the lower line.
Weekly check the guide rail oil path is smooth, to eliminate the guide rail oil loss.
It is recommended that the oil tank be cleaned every three months.
Lubricating grease is refilled regularly according to regulations.
6、Surface grinder left and right mechanism
It is prohibited to adjust the left and right travel during the table movement.
When the steel cable of the working table is loose, adjustment should be done immediately. (This article applies to manual models)
7、Flushing and dust-absorbing device of surface grinder
The cleaning and maintenance of the filter of the dust-absorbing box, it is better to clean it once every two weeks. Another is the inspection of coolant, generally when the coolant appears to be contaminated, it should be checked and removed in time.
Surface grinding machine in the specific operation process need to pay attention to those contents? Follow the editor of our Gangyu Grinder to take a look!
1, The positioning rules of surface grinding machine
What position should the machine tool be placed in and how to install it is the best? It is understood that should be in the maximum movement space outside the reserved 300mm or more, each foot screws eat tight, the table in front of the back and left and right level in 0.04/1000mm or less. (Installation of frequency converter requirements need to be higher)
2、Selection of grinding wheel for surface grinder
The selected grinding wheel must be able to withstand the weekly rotation speed of 2000m/min or more, because if the speed is too low, it will be easy to leave traces on, but the speed is too high, the grinding wheel price is much higher, in addition to pay special attention to is strictly prohibited to use the grinding wheel with damage. If there are conditions, it is best to do a flange must be balanced after the new grinding wheel is installed.
3, Surface grinding machine spindle
Before installing the grinding wheel to determine the spindle for clockwise rotation.
4、Hydraulic device of surface grinder
Surface grinder using viscosity of 46 hydraulic oil.
New machine in the use of three months after the need to replace the hydraulic oil, and then replaced once a year, and must clean the oil tank.
5、Lubrication device of surface grinder
Use guideway lubricant with a viscosity of No. 32. (Recommended Mavita No. 1 or No. 1405).
Confirm the oil level of the oil tank (pool) every day to ensure that it is above the lower line.
Weekly check the guide rail oil path is smooth, to eliminate the guide rail oil loss.
It is recommended that the oil tank be cleaned every three months.
Lubricating grease is refilled regularly according to regulations.
6、Surface grinder left and right mechanism
It is prohibited to adjust the left and right travel during the table movement.
When the steel cable of the working table is loose, adjustment should be done immediately. (This article applies to manual models)
7、Flushing and dust-absorbing device of surface grinder
The cleaning and maintenance of the filter of the dust-absorbing box, it is better to clean it once every two weeks. Another is the inspection of coolant, generally when the coolant appears to be contaminated, it should be checked and removed in time.
